Adhering breast forms to the skin can be greatly assisted with the use of our FemMix adhesive. FemMix is a two part glue, which temporarily adheres all of our prosthetics directly to human skin - without affecting their ability to flex and move naturally.
The proper FemMix ratio is 1-part A, plus 1-part B (by volume). After mixing A and B together, spread the mix evenly onto a flat piece of glass, laminate or plastic. Next, lay the back side of one breast form onto the glass and ensure that an even coating of the mix is applied, then position the form above your own breast and hold it in position for five minutes while the FemMix cures. Repeat the process for the opposite breast.
Note: FemMix cures rapidly, so only mix enough for one breast at a time.
To remove FemMix, slowly peel the prosthetic away from the skin and slowly peel the FemMix off of the Prosthetic.